# Teradek RT FIZ Kit (CTRL.3): power

Data version 6d29e2f86993, built 2026-10-26; facts on this page checked 2026-10-21.

Power of [Teradek RT FIZ Kit (CTRL.3)](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3.md), every field with its source and date. A field no source publishes reads "Not collected yet."; that is not a "no". A note is Teradek's remark next to a figure; a figure inside a note is not stored as a spec.
## Power

- <a id="specs-power-input_v_min"></a>RT FIZ Kits with CTRL.3: lowest input voltage 7 V. Source: official page (https://teradek.com/products/rt-fiz-kits-copy-1), seen 2026-10-21. Source note: "B&H". Note: 7V DC minimum receiver input voltage (4.75V DC for controller via USB). Published figures disagree: 7 V (official page at teradek.com) and 6.2 V (official page at guide.teradek.com, seen 2026-10-21); shown: 7 V.
- <a id="specs-power-input_v_max"></a>RT FIZ Kits with CTRL.3: highest input voltage 17 V. Source: official page (https://teradek.com/products/rt-fiz-kits-copy-1), seen 2026-10-21. Source note: "B&H". Note: 17V DC maximum receiver input voltage (supports 12-14.4V cinema camera power). Published figures disagree: 17 V (official page at teradek.com) and 8.4 V (official page at guide.teradek.com, seen 2026-10-21); shown: 17 V.
- <a id="specs-power-consumption_w_typical"></a>RT FIZ Kits with CTRL.3: typical power draw 3.5 W. Source: Teradek product data, seen 2026-10-21. Note: 3.5W nominal idle/telemetry power consumption (1.5W controller + 2W idle receiver).
- <a id="specs-power-consumption_w_max"></a>RT FIZ Kits with CTRL.3: maximum power draw 38 W. Source: Teradek product data, seen 2026-10-21. Note: Up to 38W peak system draw with multiple motors under high torque load.
- <a id="specs-power-battery_mounts"></a>RT FIZ Kits with CTRL.3: battery mounts: none. Source: official page (https://teradek.com/products/rt-fiz-kits-copy-1), seen 2026-10-21. Note: Allowed enum: none (uses Canon LP-E6 on controller and 2-pin LEMO DC on receiver).
- <a id="specs-power-connector"></a>RT FIZ Kits with CTRL.3: connector: Integrated Canon LP-E6 battery slot (controller); 2-pin LEMO 0B DC input (receiver). Source: official page (https://teradek.com/products/rt-fiz-kits-copy-1), seen 2026-10-21. Note: Primary power via removable LP-E6 battery on handset and 2-pin LEMO 0B on receiver.

## Battery runtime

- RT FIZ Kits with CTRL.3 on a 50 Wh battery: about 14.3 h at typical draw (3.5 W), about 1.3 h at maximum draw (38 W). Workings: [/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=50](https://specs-dev.teradek.com/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=50).
- RT FIZ Kits with CTRL.3 on a 98 Wh battery: about 28.0 h at typical draw (3.5 W), about 2.6 h at maximum draw (38 W). Workings: [/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=98](https://specs-dev.teradek.com/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=98).
- RT FIZ Kits with CTRL.3 on a 150 Wh battery: about 42.9 h at typical draw (3.5 W), about 3.9 h at maximum draw (38 W). Workings: [/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=150](https://specs-dev.teradek.com/calc/battery-runtime.md?product=prod.rt-fiz-kit-ctrl-3&wh=150).

Runtime = battery watt-hours ÷ stated draw: an estimate, not a measured runtime. Not included: the monitor, camera and accessories on the same battery, conversion losses, battery ageing and cold.

## Not on this site

- No field report (a third-party test, measurement or repair report) is held for RT FIZ Kits with CTRL.3; the figures here are Teradek's.

## Sources on this page

- [official page at teradek.com](https://specs-dev.teradek.com/sources/src.teradek-com.products.rt-fiz-kits-copy-1.md)
- [Teradek product data](https://specs-dev.teradek.com/sources/src.teradek-data-a16e89b2.md)
- [Teradek product data](https://specs-dev.teradek.com/sources/src.teradek-data-0c698aab.md)

## Other topics

- [Video, audio and latency](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/video.md)
- [Radio](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/rf.md)
- [Transport, network and control](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/transport.md)
- [Physical](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/physical.md)
- [Regulatory](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/regulatory.md)
- [Lifecycle and firmware](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/lifecycle.md)
- [Variants](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/variants.md)
- [Compatibility](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/compatibility.md)
- [Workflows](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/workflows.md)
- [Network requirements](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/network.md)
- [Support](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/support.md)
- [Prices](https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/prices.md)

---

Cite as specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/power (data version 6d29e2f86993).
HTML page: https://specs-dev.teradek.com/products/prod.rt-fiz-kit-ctrl-3/power · How to read this site: [/about.md](https://specs-dev.teradek.com/about.md) · Index for agents: [/llms.txt](https://specs-dev.teradek.com/llms.txt)
