Bolt 6 10K RX
CurrentUltra long-range zero-delay 4K HDR wireless video receiver operating over 5GHz and 6GHz up to 10000 feet Raw value as published“Ultra long-range zero-delay 4K HDR wireless video receiver operating over 5GHz and 6GHz up to 10000 feet” Sourcesrc.teradek-com.products.bolt-6-xt-10k-rxhttps://teradek.com/products/bolt-6-xt-10k-rx Tier: OfficialObserved 2026-10-21Confidence: high Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Power
A note is Teradek's remark next to a figure; a figure inside a note is not stored as a spec.
| Field | Value | Last checked |
|---|---|---|
| Lowest input voltage |
6 V
Raw value as published“6 | note: 6V DC minimum”
Sourcesrc.guide-teradek-com.a.1978360-bolt-6-xt-10k-rx-quick-start-guidehttps://guide.teradek.com/a/1978360-bolt-6-xt-10k-rx-quick-start-guide
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Published figures disagree: 6 V (official page at guide.teradek.com) and 10 V (official page at teradek.com, seen 2026-10-21); shown: 6 V. |
2026-10-21 |
| Highest input voltage |
28 V
Raw value as published“28 | note: 28V DC maximum (supports 14V/26V systems)”
Sourcesrc.guide-teradek-com.a.1978360-bolt-6-xt-10k-rx-quick-start-guidehttps://guide.teradek.com/a/1978360-bolt-6-xt-10k-rx-quick-start-guide
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftCorroborated by 1 sourceOverrides the official claim Open source ↗
|
2026-10-21 |
| Typical power draw |
18 W
Raw value as published“18 | note: 18W nominal power consumption”
Sourcesrc.guide-teradek-com.a.1976544-bolt-6-xt-10k-receiver-rxhttps://guide.teradek.com/a/1976544-bolt-6-xt-10k-receiver-rx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftCorroborated by 1 sourceOverrides the official claim Open source ↗
|
2026-10-21 |
| Maximum power draw |
20 W
Raw value as published“20 | note: 20W maximum power consumption”
Sourcesrc.guide-teradek-com.a.1978360-bolt-6-xt-10k-rx-quick-start-guidehttps://guide.teradek.com/a/1978360-bolt-6-xt-10k-rx-quick-start-guide
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Battery mounts |
V-mount, Gold-mount
Raw value as published“V-mount; Gold-mount | note: Supports 14V and 26V battery plates”
Sourcesrc.teradek-com.products.bolt-6-xt-10k-rxhttps://teradek.com/products/bolt-6-xt-10k-rx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Connector |
2-pin circular locking connector (Pin 1 GND, Pin 2 +DC)
Raw value as published“2-pin circular locking connector (Pin 1 GND, Pin 2 +DC) | note: 2-pin locking DC power connector”
Sourcesrc.guide-teradek-com.a.1978360-bolt-6-xt-10k-rx-quick-start-guidehttps://guide.teradek.com/a/1978360-bolt-6-xt-10k-rx-quick-start-guide
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
|
2026-10-21 |
Battery runtime
50 Wh: about 2.8 h at typical draw (18 W), about 2.5 h at maximum draw (20 W)
98 Wh: about 5.4 h at typical draw (18 W), about 4.9 h at maximum draw (20 W)
150 Wh: about 8.3 h at typical draw (18 W), about 7.5 h at maximum draw (20 W)
Runtime = battery watt-hours ÷ stated draw: an estimate, not a measured runtime. Not included: the monitor, camera and accessories on the same battery, conversion losses, battery ageing and cold.
Not on this site
No field report (a third-party test, measurement or repair report) is held for Bolt 6 10K RX; the figures here are Teradek's.