Bolt 6 XT Transmitter
LegacyendpointNo one-line description
Legacy
Bolt 6 XT Transmitter is a legacy product.
Kept for installed-base and compatibility questions; not recommended for new projects. No successor is recorded.
What works with Bolt 6 XT Transmitter, grouped by result. Edges set on a family or line apply to every product in it; an edge that names this product, its line or its family is listed here, seen from this product.
Relation
Works fully0
None.
Works with limits4
Bolt 6 LT RX
Pairs with · both ways
Cross-compatible in 5GHz and 6GHz bands; output limited to receiver max resolution (1080p60 SDI / 4K30 HDMI) - Conditions
- None
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 4.0.0 on both ends (Bolt 6)
Raw value as published—
Sourcesrc.teradek-com.pages.bolt-6-lthttps://teradek.com/pages/bolt-6-lt
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Also, not used here: not confirmed. Raw value as published— Sourcesrc.teradek-com.pages.bolt-6-lthttps://teradek.com/pages/bolt-6-lt Tier: OfficialObserved 2026-10-21Confidence: medium Open source ↗ This page goes by the statement above: a definite result outranks "not confirmed".
Cross-compatible for zero-delay video in 5GHz and 6GHz bands; 900MHz data requires Bolt 7 TX
- Conditions
- None
- Features lost
- 900 MHz data channel
- Performance limit
- mixed pair runs at the range of the lower model
- Minimum firmware
- 4.5.0 on the Bolt end
Raw value as published—
Sourcesrc.teradek-com.pages.bolt-7https://teradek.com/pages/bolt-7
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Zero-delay video supported on 5GHz and 6GHz bands; 900MHz data channel not supported on Bolt 6
- Conditions
- None
- Features lost
- 900 MHz data channel
- Performance limit
- mixed pair runs at the range of the lower model
- Minimum firmware
- 4.0.0 on the Bolt 6 end
Raw value as published—
Sourcesrc.teradek-com.pages.bolt-7https://teradek.com/pages/bolt-7
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
RF-X Video Auto Switcher Auto-Switcher for Bolt 4K/6 and Ranger RXs
Pairs with · both waysApplies to the whole Bolt 6 line
Requires all connected receivers to be Bolt series (cannot mix Bolt and Ranger) - Conditions
- None
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 1.0.0 (the source does not say on which end)
Raw value as published—
Sourcesrc.guide-teradek-com.a.2030818-rf-x-quick-start-guidehttps://guide.teradek.com/a/2030818-rf-x-quick-start-guide
Tier: OfficialObserved 2026-10-21Confidence: medium
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Works locally only0
None.
Does not work0
None.
Unknown7
Cross-compatible in 5GHz and 6GHz modes
- Conditions
- Mode: 5 GHz
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 1.4.0 (the source does not say on which end)
Raw value as published—
Sourcesrc.teradek-com.pages.acehttps://teradek.com/pages/ace
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware releaseneeds review
Cross-compatible in 5GHz and 6GHz modes
- Conditions
- Mode: 5 GHz
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 1.4.0 (the source does not say on which end)
Raw value as published—
Sourcesrc.teradek-com.pages.acehttps://teradek.com/pages/ace
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware releaseneeds review
Cross-compatible in 5GHz and 6GHz modes
- Conditions
- None
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 1.4.0 (the source does not say on which end)
Raw value as published—
Sourcesrc.teradek-com.products.ace-micro-txhttps://teradek.com/products/ace-micro-tx
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Cross-compatible across 5GHz and 6GHz bands
- Conditions
- None
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 1.0.0 (the source does not say on which end)
Raw value as published—
Sourcesrc.teradek-com.products.bolt-6-xt-10k-rxhttps://teradek.com/products/bolt-6-xt-10k-rx
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Raw value as published—
Sourcesrc.teradek-com.pages.bolt-6-lthttps://teradek.com/pages/bolt-6-lt
Tier: OfficialObserved 2026-10-21Confidence: medium
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Bolt Mobile RX
Pairs with · both ways
Pairs in 5GHz and 6GHz bands; 4Kp30 UVC output to iPad - Conditions
- None
- Features lost
- None
- Performance limit
- None
- Minimum firmware
- 4.0.0 on the Bolt 6 end
Raw value as published—
Sourcesrc.teradek-com.products.bolt-mobile-rxhttps://teradek.com/products/bolt-mobile-rx
Tier: OfficialObserved 2026-10-21Confidence: high
Open source ↗
Checked 2026-10-21 · re-check after firmware release
Raw value as published—
Sourcesrc.teradek-com.products.bolt-mobile-rxhttps://teradek.com/products/bolt-mobile-rx
Tier: OfficialObserved 2026-10-21Confidence: medium
Open source ↗
Checked 2026-10-21 · re-check after firmware release
An unknown result means no source documents it, not that it fails. Every row cites the edge's source; low-confidence rows are marked.