Bolt 7 12G-SDI/HDMI Wireless TX
AnnouncedZero-delay 4K60 12G-SDI and HDMI wireless transmitter with integrated 900MHz data channel for camera control and telemetry Raw value as published“Zero-delay 4K60 12G-SDI and HDMI wireless transmitter with integrated 900MHz data channel for camera control and telemetry | note: Max 20 words, no marketing superlatives” Sourcesrc.teradek-com.pages.bolt-7https://teradek.com/pages/bolt-7 Tier: OfficialObserved 2026-10-21Confidence: high Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Power
A note is Teradek's remark next to a figure; a figure inside a note is not stored as a spec.
| Field | Value | Last checked |
|---|---|---|
| Lowest input voltage |
6 V
Raw value as published“6 | note: 6-28V DC input range”
Sourcesrc.teradek-com.products.bolt-7-txhttps://teradek.com/products/bolt-7-tx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Highest input voltage |
28 V
Raw value as published“28 | note: 6-28V DC input range”
Sourcesrc.teradek-com.products.bolt-7-txhttps://teradek.com/products/bolt-7-tx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Typical power draw |
14 W
Raw value as published“14 | note: 14W nominal power consumption”
SourceTeradek product data
Tier: Lab estimateObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim
Greyed: “Official only” is on. Not counted in completeness.
Published figures disagree: 14 W (Teradek product data) and 20 W (official page at teradek.com, seen 2026-10-21); shown: 14 W. |
2026-10-21 |
| Maximum power draw |
20 W
Raw value as published“20 | source: Markertek | note: 20W maximum power consumption”
Sourcesrc.teradek-com.products.bolt-7-txhttps://teradek.com/products/bolt-7-tx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Battery mounts |
V-mount, Gold-mount, none
Raw value as published“V-mount; Gold-mount; none | note: Optional modular battery cradles (V-Mount, Gold Mount, Gold Mount Plus)”
Sourcesrc.teradek-com.pages.bolt-7https://teradek.com/pages/bolt-7
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
|
2026-10-21 |
| Connector |
2-pin circular locking connector
Raw value as published“2-pin circular locking connector | note: 2-pin locking LEMO 0B-compatible connector (6-28V DC)”
Sourcesrc.teradek-com.products.bolt-7-txhttps://teradek.com/products/bolt-7-tx
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
Battery runtime
50 Wh: about 3.6 h at typical draw (14 W), about 2.5 h at maximum draw (20 W)
98 Wh: about 7.0 h at typical draw (14 W), about 4.9 h at maximum draw (20 W)
150 Wh: about 10.7 h at typical draw (14 W), about 7.5 h at maximum draw (20 W)
Runtime = battery watt-hours ÷ stated draw: an estimate, not a measured runtime. Not included: the monitor, camera and accessories on the same battery, conversion losses, battery ageing and cold.
Not on this site
No field report (a third-party test, measurement or repair report) is held for Bolt 7 TX; the figures here are Teradek's.