Teradek RT CTRL.3 - Three-axis Wireless Lens Controller
CurrentThree-axis wireless lens controller with built-in lens mapping, OLED display, and SmallHD monitor data overlays Raw value as published“Three-axis wireless lens controller with built-in lens mapping, OLED display, and SmallHD monitor data overlays | note: Concise product positioning description under 20 words” Sourcesrc.teradek-com.products.ctrl-3-three-axis-wireless-lens-controllerhttps://teradek.com/products/ctrl-3-three-axis-wireless-lens-controller Tier: OfficialObserved 2026-10-21Confidence: high Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Power
A note is Teradek's remark next to a figure; a figure inside a note is not stored as a spec.
| Field | Value | Last checked |
|---|---|---|
| Lowest input voltage |
4.75 V
Raw value as published“4.75 | note: 4.75V DC minimum input via USB port (Canon LP-E6 battery: 6.2 to 8.4V)”
Sourcesrc.teradek-com.products.ctrl-3-three-axis-wireless-lens-controllerhttps://teradek.com/products/ctrl-3-three-axis-wireless-lens-controller
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Published figures disagree: 4.75 V (official page at teradek.com) and 6.2 V (official page at teradek.com, seen 2026-10-21); shown: 4.75 V. |
2026-10-21 |
| Highest input voltage |
9 V
Raw value as published“9 | note: 9V DC maximum input via USB / wired interface (Canon LP-E6: up to 8.4V)”
Sourcesrc.teradek-com.products.ctrl-3-three-axis-wireless-lens-controllerhttps://teradek.com/products/ctrl-3-three-axis-wireless-lens-controller
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Published figures disagree: 9 V (official page at teradek.com) and 8.4 V (official page at teradek.com, seen 2026-10-21); shown: 9 V. |
2026-10-21 |
| Typical power draw |
1.5 W
Raw value as published“1.5 | note: 1.5W nominal consumption (up to 36 hours continuous runtime on Canon LP-E6)”
SourceTeradek product data
Tier: Lab estimateObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim
Greyed: “Official only” is on. Not counted in completeness.
|
2026-10-21 |
| Maximum power draw |
3 W
Raw value as published“3 | note: 3W peak power draw with full display brightness and maximum RF power”
SourceTeradek product data
Tier: Lab estimateObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim
Greyed: “Official only” is on. Not counted in completeness.
|
2026-10-21 |
| Battery mounts |
none
Raw value as published“none | note: Allowed enum: none (uses integrated internal Canon LP-E6 battery bay)”
Sourcesrc.teradek-com.products.ctrl-3-three-axis-wireless-lens-controllerhttps://teradek.com/products/ctrl-3-three-axis-wireless-lens-controller
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Connector |
Integrated Canon LP-E6 battery slot; USB Mini-B / USB-A power input (4.75-9V DC)
Raw value as published“Integrated Canon LP-E6 battery slot; USB Mini-B / USB-A power input (4.75-9V DC) | note: Primary power via removable Canon LP-E6 battery or wired USB power”
Sourcesrc.teradek-com.products.ctrl-3-three-axis-wireless-lens-controllerhttps://teradek.com/products/ctrl-3-three-axis-wireless-lens-controller
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
Battery runtime
50 Wh: about 33.3 h at typical draw (1.5 W), about 16.7 h at maximum draw (3 W)
98 Wh: about 65.3 h at typical draw (1.5 W), about 32.7 h at maximum draw (3 W)
150 Wh: about 100.0 h at typical draw (1.5 W), about 50.0 h at maximum draw (3 W)
Runtime = battery watt-hours ÷ stated draw: an estimate, not a measured runtime. Not included: the monitor, camera and accessories on the same battery, conversion losses, battery ageing and cold.
Not on this site
No field report (a third-party test, measurement or repair report) is held for CTRL.3; the figures here are Teradek's.