Teradek MDR.S
CurrentCompact and ultralight 3-channel wireless lens control receiver with integrated Bluetooth and OLED display Raw value as published“Compact and ultralight 3-channel wireless lens control receiver with integrated Bluetooth and OLED display | note: Concise product positioning description under 20 words” Sourcesrc.teradek-com.products.mdr-shttps://teradek.com/products/mdr-s Tier: OfficialObserved 2026-10-21Confidence: high Method: humanReview: draft1 alternative claimOverrides the official claim Open source ↗
Power
A note is Teradek's remark next to a figure; a figure inside a note is not stored as a spec.
| Field | Value | Last checked |
|---|---|---|
| Lowest input voltage |
5 V
Raw value as published“5 | source: Teradek product data | note: 5V DC minimum input voltage”
Sourcesrc.teradek-com.products.mdr-shttps://teradek.com/products/mdr-s
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Highest input voltage |
28 V
Raw value as published“28 | source: B&H | note: 28V DC maximum input voltage”
Sourcesrc.teradek-com.products.mdr-shttps://teradek.com/products/mdr-s
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Typical power draw |
1.5 W
Raw value as published“1.5 | note: 1.5W nominal idle/telemetry power consumption (excluding active motor draw)”
SourceTeradek product data
Tier: Lab estimateObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim
Greyed: “Official only” is on. Not counted in completeness.
|
2026-10-21 |
| Maximum power draw |
30 W
Raw value as published“30 | note: Up to 30W peak pass-through with 3 high-torque motors under full load”
SourceTeradek product data
Tier: Lab estimateObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim
Greyed: “Official only” is on. Not counted in completeness.
|
2026-10-21 |
| Battery mounts |
none
Raw value as published“none | note: Allowed enum: none (powered via external DC cable)”
Sourcesrc.teradek-com.products.mdr-shttps://teradek.com/products/mdr-s
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draftOverrides the official claim Open source ↗
|
2026-10-21 |
| Connector |
3-pin LEMO 0B (5-28V DC)
Raw value as published“3-pin LEMO 0B (5-28V DC) | source: Teradek product data | note: 3-pin LEMO 0B connector supporting P-Tap and camera power cables”
Sourcesrc.teradek-com.products.mdr-shttps://teradek.com/products/mdr-s
Tier: OfficialObserved 2026-10-21Confidence: high
Method: humanReview: draft2 alternative claimsOverrides the official claim Open source ↗
|
2026-10-21 |
Battery runtime
50 Wh: about 33.3 h at typical draw (1.5 W), about 1.7 h at maximum draw (30 W)
98 Wh: about 65.3 h at typical draw (1.5 W), about 3.3 h at maximum draw (30 W)
150 Wh: about 100.0 h at typical draw (1.5 W), about 5.0 h at maximum draw (30 W)
Runtime = battery watt-hours ÷ stated draw: an estimate, not a measured runtime. Not included: the monitor, camera and accessories on the same battery, conversion losses, battery ageing and cold.
Not on this site
No field report (a third-party test, measurement or repair report) is held for MDR.S; the figures here are Teradek's.